Tool 94: TCP backdoor client (exec)


  This tool runs a command on server of tool 93.
  Parameter --command contains the command to run. This command must
  have the full path. For example '/bin/sh -c ls', and not just 'ls'.
  Parameter --dst-file defines the file containing the result of
  Parameter --password defines the password (same as server's password).
  Parameter --cypher defines if data has to be encrypted. Please note
  this is not very strong. If known text is used, this algorithm can be
  Parameter --dst-ip is the address of remote host/server.
  Parameter --dst-port is the port number where to connect.
  Optional parameter --src-ip defines the local IP address to use.
  Optional parameter --src-port defines the local port number to use.
  Optional parameter --ip4opts permits to add IPv4 options encoded as
  Optional parameter --ip6exts permits to add IPv6 options encoded as
  mixed (first byte is the next header number).
  Optional parameters --device, --src-eth and --dst-eth permits to
  create a virtual client using fake addresses.


  netwox 94 -i ip -p port -c data [-F file] [-w password] [-d device] [-E eth] [-e eth] [-I ip] [-P port] [-o ip4opts] [-O ip6exts] [-x|+x] [-T uint32]


parameter description example
-i|--dst-ip ip destination IP address
-p|--dst-port port destination port number 80
-c|--command data command to execute /bin/sh -c ls
-F|--dst-file file destination filename dstfile.txt
-w|--password password password netwox
-d|--device device device name Eth0
-E|--src-eth eth source ethernet address 0:2:3:4:5:6
-e|--dst-eth eth destination ethernet address 0:8:9:a:b:c
-I|--src-ip ip source IP address
-P|--src-port port source port number 0
-o|--ip4opts ip4opts IPv4 options  
-O|--ip6exts ip6exts IPv6 extensions  
-x|--cypher|+x|--no-cypher if data is encrypted  
-T|--timeout uint32 timeout in seconds 100


  netwox 94 -i "" -p "80" -c "/bin/sh -c ls"

  netwox 94 --dst-ip "" --dst-port "80" --command "/bin/sh -c ls"