Tool 63: Traceroute on a specified IP protocol
This tool lists routers on the path to a computer. To achieve this,
packets have their TTL (Time To Live) slowly increased. If TTL reaches
0 in transit, the corresponding router sends back an ICMP error.
This tool sends an IP only packet. There is no way to detect end (it
depends on protocol), so user has to interrupt tool at end.
Parameter --spoofip indicates how to generate link layer for spoofing.
Values 'best', 'link' or 'raw' are common choices for --spoofip. Here
is the list of accepted values:
- 'raw' means to spoof at IP4/IP6 level (it uses system IP stack). If
a firewall is installed, or on some systems, this might not work.
- 'linkf' means to spoof at link level (currently, only Ethernet is
supported). The 'f' means to Fill source Ethernet address.
However, if source IP address is spoofed, it might be impossible
to Fill it. So, linkf will not work: use linkb or linkfb instead.
- 'linkb' means to spoof at link level. The 'b' means to left a Blank
source Ethernet address (0:0:0:0:0:0, do not try to Fill it).
- 'linkfb' means to spoof at link level. The 'f' means to try to Fill
source Ethernet address, but if it is not possible, it is left
- 'rawlinkf' means to try 'raw', then try 'linkf'
- 'rawlinkb' means to try 'raw', then try 'linkb'
- 'rawlinkfb' means to try 'raw', then try 'linkfb'
- 'linkfraw' means to try 'linkf', then try 'raw'
- 'linkbraw' means to try 'linkb', then try 'raw'
- 'linkfbraw' means to try 'linkfb', then try 'raw'
- 'link' is an alias for 'linkfb'
- 'rawlink' is an alias for 'rawlinkfb'
- 'linkraw' is an alias for 'linkfbraw'
- 'best' is an alias for 'linkraw'. It should work in all cases.
netwox 63 -i ip [-p uint32] [-D mixed_data] [-s spoofip] [-t uint32] [-m uint32]
||destination IP address
||IP spoof initialization type
||max millisecond wait
netwox 63 -i "126.96.36.199"
netwox 63 --dst-ip "188.8.131.52"