Tool 54: Ping UDP (EthIp spoof)

Description:

  This tool checks if a host is up. It's done sending a probe packet and
  expecting a reply.
  This tool sends an UDP packet to a computer. If host permits UDP, it
  will send back an ICMP error (if port is closed), or send back nothing
  (if port is open). So, it's important to understand UDP port has to be
  closed for computer to return something.
  This tool also permits to use fake Ethernet and IP addresses.
   

Synonyms:

  answer, query, verify

Usage:

  netwox 54 -i ip [-d device] [-E eth] [-e eth] [-I ip] [-p port] [-c uint32] [-m uint32] [-b|+b] [-1|+1]

Parameters:

parameter description example
-i|--dst-ip ip destination IP address 5.6.7.8
-d|--device device device name Eth0
-E|--src-eth eth source ethernet address 0:a:a:a:a:a
-e|--dst-eth eth destination ethernet address 0:b:b:b:b:b
-I|--src-ip ip source IP address 1.2.3.4
-p|--dst-port port destination port number 80
-c|--max-count uint32 max requests 0
-m|--max-ms uint32 max millisecond wait 0
-b|--beep|+b|--no-beep beep if reached  
-1|--display01|+1|--no-display01 display only 0 or 1  

Examples:

  netwox 54 -i "5.6.7.8"

  netwox 54 --dst-ip "5.6.7.8"