Tool 50: Ping ICMP (EthIP spoof)
Description:
This tool checks if a host is up. It's done sending a probe packet and
expecting a reply.
This tool sends an ICMP Echo Request to a computer. If host is up and
permitting ping, it will send back an ICMP Echo Reply.
This tool also permits to use fake Ethernet and IP addresses.
Synonyms:
answer, query, verify
Usage:
netwox 50 -i ip [-d device] [-E eth] [-e eth] [-I ip] [-c uint32] [-m uint32] [-b|+b] [-1|+1]
Parameters:
| parameter |
description |
example |
| -i|--dst-ip ip |
destination IP address |
5.6.7.8 |
| -d|--device device |
spoof device |
Eth0 |
| -E|--src-eth eth |
source ethernet address |
0:a:a:a:a:a |
| -e|--dst-eth eth |
destination ethernet address |
0:b:b:b:b:b |
| -I|--src-ip ip |
source IP address |
1.2.3.4 |
| -c|--max-count uint32 |
max requests |
0 |
| -m|--max-ms uint32 |
max millisecond wait |
0 |
| -b|--beep|+b|--no-beep |
beep if reached |
|
| -1|--display01|+1|--no-display01 |
display only 0 or 1 |
|
Examples:
netwox 50 -i "5.6.7.8"
netwox 50 --dst-ip "5.6.7.8"