Tool 116: FTP client : put a directory recursively


  This tool stores a directory, and all its sub-directories, to a FTP
  Parameters --user and --pass defines the username and password.
  FTP protocol can use Active or Passive transfers. Parameter --passive
  activates a passive transfer (by default, it's active).
  Parameter --dst-ip is the address of remote host/server.
  Parameter --dst-port is the port number where to connect.
  Optional parameter --src-ip defines the local IP address to use.
  Optional parameter --src-port defines the local port number to use.
  Optional parameter --ip4opts permits to add IPv4 options encoded as
  Optional parameter --ip6exts permits to add IPv6 options encoded as
  mixed (first byte is the next header number).
  Optional parameters --device, --src-eth and --dst-eth permits to
  create a virtual client using fake addresses.




  netwox 116 -i ip [-u data] [-a password] [-V|+V] -f dir -F dir [-d device] [-E eth] [-e eth] [-I ip] [-P port] [-p port] [-o ip4opts] [-O ip6exts] [-T uint32]


parameter description example
-i|--dst-ip ip destination IP address
-u|--user data username anonymous
-a|--pass password password user@
-V|--passive|+V|--no-passive passive  
-f|--local-dir dir local dir  
-F|--remote-dir dir remote dir /tmp
-d|--device device device name Eth0
-E|--src-eth eth source ethernet address 0:2:3:4:5:6
-e|--dst-eth eth destination ethernet address 0:8:9:a:b:c
-I|--src-ip ip source IP address
-P|--src-port port source port number 0
-p|--dst-port port destination port number 21
-o|--ip4opts ip4opts IPv4 options  
-O|--ip6exts ip6exts IPv6 extensions  
-T|--timeout uint32 timeout in milliseconds 10000


  netwox 116 -i "" -f "" -F "/tmp"

  netwox 116 --dst-ip "" --local-dir "" --remote-dir "/tmp"